Expert Yogi
Posts: 8285
    
| Self priming pump is a common type of water pump, whose main feature is that it can draw liquid on its own without the need for external water supply. Therefore, self priming pumps are widely used in many fields, such as industry, agriculture, construction, and so on. However, is a self priming pump suitable for use at low water levels?
This article will explore the working principle of self priming pumps, the definition of low water level, and the applicability of self priming pumps.
Firstly, we need to understand the working principle of self priming pumps. A self priming pump is a centrifugal pump that works by drawing liquid into the pump body through centrifugal force, and then compressing and discharging the liquid through the impeller inside the pump body. The suction and discharge pipelines of a self priming pump are connected, thus forming a closed space inside the pump body. When the pressure inside the pump body is lower than atmospheric pressure, the liquid will be sucked into the pump body. Therefore, the suction height of a self priming pump is limited, usually around 5 meters.
Next, we need to understand the definition of low water level. Low water level refers to the water level being lower than the suction height of the self priming pump, which means that when the water level is below 5 meters, the self priming pump cannot function properly. This is because the working principle of a self priming pump requires the formation of a closed space inside the pump body, and under low water levels, there is insufficient negative pressure inside the pump body to absorb liquid.
Finally, we need to understand the applicability of self priming pumps. Self priming pumps are suitable for sucking liquids such as clean water, sewage, oil, etc. However, for liquids containing solid particles or fibers, the effectiveness of self priming pumps may be affected.
In addition, the suction height of the self priming pump is limited, so it is necessary to choose the appropriate pump type and installation position according to the actual situation when using it. In summary, the self priming pump cannot operate normally under low water levels, so it is necessary to consider the actual situation when selecting the pump type and installation location. If pumps need to be used at low water levels, other types of pumps, such as submersible pumps, centrifugal pumps, etc., can be considered.
Liquid ring compressors in refineries |
Can a self priming pump be used for low water levels
