YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



18 details to be noticed in operation of pneumatic diaphragm pump
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Yoga -> General YogaMessage format
 
fengqingxue
Posted 2019-06-12 10:13 PM (#251900)
Subject: 18 details to be noticed in operation of pneumatic diaphragm pump


Expert Yogi

Posts: 7714
50002000500100100
Pneumatic diaphragm pump is a kind of diaphragm pump. The common diaphragm pump is divided into pneumatic diaphragm pump and electric diaphragm pump. The electric diaphragm pump controls the reciprocating motion of diaphragm to form pressure and flow through electric energy and cycloidal pin reducer. The pneumatic diaphragm pump is a volume pump driven by compressed air and caused by reciprocating deformation of diaphragm. Its working principle is similar to that of plunger pump.
When using pneumatic diaphragm pump to operate, we should pay attention to the following points:
1. Ensure that the maximum particle contained in the fluid does not exceed the maximum safe passage particle diameter standard of the pump.
2. The intake pressure should not exceed the maximum allowable pressure of the pump. Compressed air above the rated pressure may cause personal injury, property loss and damage to the performance of the pump.
3. Guarantee that the pump pressure pipeline system can withstand the maximum output pressure, and ensure the clean and normal working conditions of the driving gas system.
4. Electrostatic spark may cause explosion, which may lead to personal casualties and property losses. According to the need, the grounding screw on the pump should be properly and reliably grounded by using a conductor with large cross-section area.
5. Grounding requirements meet the requirements of local laws and regulations and some special requirements of the site.
6. Tighten the pump and the connecting pipe joints to prevent electrostatic sparks due to vibration impact and friction. Use antistatic hoses.
7. To periodically check and test the reliability of the grounding system, the grounding resistance should be less than 100 ohms.
8. Keep good ventilation and exhaust, keep away from flammable, explosive and heat sources.
9. The exhaust of the pump may contain solid substances. Don't point the exhaust outlet at the working area or people, so as to avoid causing personal injury.
10. When the diaphragm fails, the conveyed material will eject from the exhaust muffler.
read more:


4 HP Vacuum Pump Of Model
Vacuum Pump Companies With Vacuum Cleaner Ratings
manufacturer laboratory liquid ring vacuum pump
Continuous Muffle Mesh Belt Heat Treatment Furnace
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)