YogiSource.com my account | view cart | customer service
 Search:    
Welcome to the new Yoga.com Forums home!
For future visits, link to "http://www.YogiSource.com/forums".
Make a new bookmark.
Tell your friends so they can find us and you!

Coming soon ... exciting new changes for our website, now at YogiSource.com.

Search | Statistics | User Listing View All Forums
You are logged in as a guest. ( logon | register )



What should I pay attention to when using a heating stove?
Moderators: Moderators

Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   Meditation -> General MeditationMessage format
 
hhm1020
Posted 2018-12-24 2:08 AM (#247539)
Subject: What should I pay attention to when using a heating stove?


Expert Yogi

Posts: 8285
500020001000100100252525



1. If it is found that the water tank cannot be ignited when it is frozen, the water tank cannot be ignited when there is water shortage. 2, when using the heating stove, as long as it feels that the house is not cold, do not open the valve too much, or if the heating behind is not enough, it is necessary to consciously abide by it, don't just care about others, after all, the company installs the heating stove for one in a group. 3, power outage, pump damage, pipeline rupture, radiator leakage, water tank water spray needs to hook out the burning coal, extinguish the fire, do not use water to pour out the fire, so as not to burn people, fire can be repaired. 4. No water loss, the water tank should be filled with two-thirds of the water level, and the water level should be at least one-third. It is strictly forbidden to operate in the absence of water and water, so as not to burn the stove. If there is a lot of water, check if the system is leaking and repair it in time. Direct use of hot water in the system is prohibited, so as not to shorten the service life of the stove and system. 5. Do not use a thick iron bar to force the coal in the furnace to avoid destroying the grate. 6. Shake the handle gently when removing the ash. If you feel the difficulty when shaking, you can gently shake it back and forth. If the feeling is really shaking, it may be that the grate is stuck, indicating that the cinder is coke or there is coal gangue. After the fire hook is removed, it will be cleaned. Do not use too much force to break the grate, or use the foot to shake the handle. After the cleaning, the rocker is restored to the middle position, and the slag and the ash in the ash chamber are removed in time to avoid burning the grate. 7, timely cleaning, to avoid burning the furnace strip, coal slag is not allowed in the furnace, need to be cleaned in time to prevent agglomeration in the furnace. When adding coal and cleaning ash, the door of the switch furnace should be carefully watched to prevent the fire from falling out. 8. Do not let off the water in the system and the stove during the non-heating period to prevent the system and the stove from rusting. During the winter ceasefire, the water in the stove and system must be drained to avoid freezing and cracking the stove and system.

CUSTOM VACUUM ANNEALING FURNACE
CUSTOM VACUUM TEMPERING FURNACE
HORIZONTAL VACUUM CARBONIZING FURNACE
HIGH TEMPERATURE LABORATORY INDUCTION TYPE VACUUM GRAPHITIZATION FURNACE
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)