Wood flooring is a new type of environment-friendly wood-plastic composite products, in the production of high-density fiberboard produced in the process of wood phenol, by adding recycled plastic granulation equipment made of wood-plastic composite materials, and then extrusion production group Made of wood-plastic floor. Today we take a look at the staircase plastic wood flooring installation methods and precautions.

Staircase solid wood flooring installation method

The first step: leveling

That is, measuring the flatness of the floor, each meter error of more than 3mm need to first leveling treatment, this step itself is not particularly difficult to deal with, as long as carefully handled it. Of course, many people choose this step when the decoration company will deal with, but the professional decoration of the staff is good, but their understanding of some of the interior decoration and not a bad idea.

Step 2: After leveling the installation

After leveling you can start the installation, before you begin to pay attention to a sequence of problems! General we recommend from the bottom up, so the operation more smoothly and can check the stairs floor, anti-pressure and normative.

Subsequently, in the flat floor installation, often encounter the need to put the floor cut-assembly of the situation. This is related to the height of the measurement of the workers, if the cut when the ruled line is not standard, will lead to the seam is too large. In the cutting of the floor, if the workers cut is not accurate, will lead to the completion of the installation of the floor after the stairs have a clear sense of difference, seriously affecting the appearance.

Stairs laying the floor need to pay attention to the place

1, the floor board problems

The first floor of the staircase is the facade, so you need to take into account the expansion and contraction of the floor when you install the floor. When the floor is extended to the facade, there should be enough space between the facade and the floor. The facade floor card stuck in the ground floor, floor stairs can be the next step of the installation.

2, the floor size of the problem

In the installation of the flat floor, the need to accurately measure the level of height to ensure that the measurement of cutting lines and cutting standards. The gap between the facade and the plane is not allowed to exceed 0.5mm; the gap between the facade or the plane and the wall and the skirting board is not allowed to exceed 1mm; the seam between the floor and the floor surface, the reinforced floor does not allow more than 0.2mm; Allow more than 0.5mm.

Related Sites:

wooden forms for precast concrete beams

outdoor benches made from decking material


interior pvc wall covering

plastic shingles australia